Sneak Peak!! Factory UTV Doors

RZRGOOCH · #**211** February 27th, 2009, 08:58 PM

Quote: Originally Posted by mikebike4

Here's what the S looks like with the all black skins.

Looks awesome!

Mike that sticker you did along the bottom of the utv door blends in so nicely with the lower panels on both sides!

Would you mind telling me where you got that done?

Thx bro

mikebike4 · #**212** February 28th, 2009, 04:20 AM

Thanx alot, i've got a plotter for making signs, any sign shop should be able to do it. If they don't have the Polaris in their software,they can find the image online then turn it to a vector image. Maybe someday i'll cut out some to sell,it is a time consuming process though. Let me know if you can't find someone local.

Total Loss · #**213** March 10th, 2009, 04:02 PM

Just received the doors- Nice.
Will post up when upper skins painted when I have my painter complete them.
Found a close match in a spray can- Rustoleum silver metallic. It has the same mettalic in it but a hair lighter. Close enough for accessories but not a door blend.

snowmantoo · #**214** March 17th, 2009, 11:42 AM

Just curious....how much to ship a set of 2008 standard RZR doors to 98371? Also do they come painted red and black as shown in the picture?

Total Loss · #**215** March 23rd, 2009, 06:44 AM

Just completed my project.
What do ya think?
Bob- note the rear winglets on the roof- that is where the extre Maier plastic went.
Paint match is very close- not perfect though. I will try and get the mix when I see the painter again- PPG water base.

[IMG]

[/IMG]

[IMG]

[/IMG]

**Factory UTV** · #**216** March 23rd, 2009, 02:22 PM

That looks AWESOME!

Total Loss · #**217** March 23rd, 2009, 03:45 PM

Quote: Originally Posted by Factory UTV

That looks AWESOME!

Thanks.
And thanks for your help.
Very happy with the way it turned out.
Time to thrash it!

**FJK** · #**218** July 13th, 2009, 08:05 PM

HI please send me pm price to 87114

RZR Jeff · #**219** July 13th, 2009, 08:53 PM

Quote: Originally Posted by fjk

HI please send me pm price to 87114

Did you go to their site Factory UTV ?

**Factory UTV** · #**220** July 13th, 2009, 09:25 PM

Quote: Originally Posted by fjk

HI please send me pm price to 87114

PM sent

chopper · #**221** July 13th, 2009, 09:58 PM

I cant see the pics it will not show it to me

**Factory UTV** · #**222** July 14th, 2009, 05:44 PM

Quote: Originally Posted by chopper

I cant see the pics it will not show it to me

RZR door info

**FJK** · #**223** July 14th, 2009, 07:52 PM

They look great .ordered mine today.did you put some type of moulding on the top of the doors ??

sanwong · #**224** July 14th, 2009, 08:17 PM

These door are the best upgrade I have made yet!!!!!!

**Factory UTV** · #**225** July 14th, 2009, 10:00 PM

Quote: Originally Posted by fjk

They look great .ordered mine today.did you put some type of moulding on the top of the doors ??

The upper door bar is slightly higher than the edge of the plastic so it's actually pretty comfortable to rest your arm there. I do all the time when cruising for hours sometimes when we are exploriing the desert and it doesn't get uncomfortable for me. My body comes equipped with a bit of extra padding though

I have seen pics where customers have put a black roll bar pad up there.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Factory UTV doors installed	bmcqueen	RZR-S Specific Discussion	18	April 20th, 2009 10:20 AM
factory utv doors	giannamyhero	General RZR Discussion	2	October 22nd, 2008 11:22 PM
Aftermarket cage w/ Factory UTV Doors	SYRT	Roll Cages and Safety Equipment	1	September 14th, 2008 09:47 AM
WTB factory UTV doors.	DCRZR	Want to Buy	0	September 11th, 2008 08:26 PM
Factory UTV Doors	CONKLIN29	General RZR Discussion	2	June 23rd, 2008 06:47 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)